Brands     Vishay Measurements Group     Interactive Guide     Gage Installation Techniques     VS-116
Gage Bonding   Getting Started You will need the following for bonding the strain gage to the specimen:   The strain gage to be bonded. Gauze Sponges . Neutralizer 5A . Blunt-nosed Tweezers . PCT Cellophane Tape .   The use of M-Bond 200 is described in Instruction Bulletin B-127, Strain Gage Installations with M-Bond 200 Adhesive . Care should be exercised when using any adhesive system. Refer to the handling precautions contained in the bulletin. Page 2 of 11