Brands
Vishay Measurements Group
Interactive Guide
Gage Installation Techniques
VS-117
|
|
|
|
|
|
|
This sequence describes how to use M-Bond 600 and 610 epoxy-phenolic adhesives to bond epoxy-phenolic-backed strain gages, including Micro-Measurements WA and WK-Series . 
Five basic operations are required: 
Adhesive Mixing
Gage Preparation
Gage Transfer
Gage Bonding
Tape Removal
Prior to performing these operations, the surface must be properly prepared . In this case the specimen is an aluminum alloy beam. |
|
|
Page 1 of 11 |