MENU

Industrial

From factory automation to energy conversion to industrial lighting, types of semiconductors and passive electronic components manufactured by Vishay play key roles. They are used in AC motor drives, power transmission and distribution, solar and wind power systems, lighting ballasts, and more. For example, factory automation systems can use MOSFETs, power ICs, diodes and rectifiers, infrared optoelectronic products, resistors, thermistors, inductors, capacitors, and other electronic components.
Industrial

Electronic Energy Meter

Vishay Components Used

  • Film Capacitors
  • Ceramic Capacitors, Multilayer
  • Al Electrolytic Capacitors
  • Varistors
  • Rectifier Diodes
  • Zener Diodes
  • Optocouplers
  • LEDs
  • IR detectors
  • IR emitters
  • Thick Film Chip Resistors
  • Thin Film Chip Resistors
EMI-Filter Reverse Polarity Protection SMPS Buck Converter Transient Protection ESD-Protection Filter Pull-Up / Down Resistor Position Sensor DC Link Current Sensor EMI-Filter Low Side Current Sensor Motor Switch Reverse Polarity Protection Transient Protection Position Sensor Temperature Sensor
EMI Filter Reverse Polarity Protection Security Switch Transient Protection SMPS Buck Converter EMI Filter Reverse Polarity Protection Security Switch Transient Protection Buffer Capacitor High Side Current Sensor High Side Switch Low Side Current Sensor Low Side Switch Storage Inductor
SMPS Converter EMI Filter Reverse Polarity Protection Transient Protection Filter ESD-Protection Pull-Up / Down Resistor Level Shift Motor Switch DC Link Current Sensor Low Side Current Sensor EMI Filter Reverse Polarity Protection Transient Protection BLDC-Motor WiFi GPS Receiver Proximity Sensor
SMPS Converter EMI Filter Reverse Polarity Protection Transient Protection ESD-Protection Filter Pull-Up / Down Resistor Buck Boost Converter EMI Filter Reverse Polarity Protection Transient Protection RGBW Sensor Blue Light Sensor Position Sensor Current Sensor
SMPS Buck Converter Reverse Polarity Protection Transient Protection Optical Smoke Detection Temperature Sensing Amplification ESD Protection Audio Amplifier Flashlight Wireless Ethernet

Modern solid-state electronic energy meters (also knows as kilowatt-hour meters, etc.) employ recently developed electronic components to measure electrical energy. Basic electronic meters are not just more cost-effective than mechanical meters, but offer further benefits: measurement accuracy of the electronic meter is about an order of magnitude better than that of a mechanical meter, while power consumption is lower by about two orders of magnitude. The electronic energy meter is also better protected against tampering than its mechanical predecessor, and units for prepaid operation (e.g., card readers) and remote meter reading (e.g., wireless, telephone line, or internet) can easily be included.

For more information please contact our technical support. Click here to send an email.