|
IR Receivers - Mold
|
Part number
|
Product Image
 |
Package
|
Dimensions
(mm) |
Carrier Frequency
(kHz) |
AGC
|
Transmission Distance Typ.
(m) |
Detection Threshold / Sensitivity Typ.
|
Half Viewing Angle
(°) |
Supply Current Typ.
(mA) |
Pinning
|
Recommended for Remote Control Code
|
Application
|
Mounting
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | 9 | 0.6 | ± 45 | 0.7 | 1 = carrier OUT, 2 = GND, 3 = VS | Repeater | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | 12 | 0.4 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Presence sensors, fast proximity sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | 2.4 | 7 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Presence sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Proximity sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | 12 | 0.1 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Presence sensors, fast proximity sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | 12 | 0.4 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Presence sensors, fast proximity sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | 2.4 | 7 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Presence sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | 12 | 0.1 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Presence sensors, fast proximity sensors | Leaded | ||||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC-S | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Sony 12 bit, 15 bit, and 20 bit IR-codes | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC-S | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Sony 12 bit, 15 bit, and 20 bit IR-codes | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38.4 | AGC1 | 21 | 0.15 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Data transmission | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC1 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC1 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC1 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 57.6 | AGC1 | 21 | 0.15 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Data transmission | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC2 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC2 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC2 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC2 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Sony | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Sony | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC2 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Sony | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Cisco | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Cisco | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC2 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Cisco | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC3 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC3 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | RCMM | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | RCMM | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | MCIR | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | MCIR, RCMM | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | MCIR, RCMM | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | MCIR | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC3 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | RCMM, MCIR | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | RECS-80 Code, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | RECS-80 Code, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Mitsubishi, RECS-80 Code, r-map, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Mitsubishi, RECS-80 Code, r-map, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Mitsubishi, RECS-80 Code, r-map, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Mitsubishi, RECS-80 Code, r-map, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC3 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | RECS-80 Code, XMP-1, XMP-2 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38.4 | AGC3 | 21 | 0.15 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Data transmission | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC3 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | r-map | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | r-map | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC3 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 57.6 | AGC3 | 21 | 0.15 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Data transmission | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC4 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC4 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | MCIR, Panasonic, RC-6 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | MCIR, Panasonic, RC-6 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | RC-5, RC-6, Panasonic | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | RC-5, RC-6, Panasonic | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | RC-5, RC-6, Panasonic | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | RC-5, RC-6, Panasonic | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC4 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | RC-6 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Mitsubishi, NEC, Sejin 4PPM, Sharp | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Mitsubishi, NEC, Sejin 4PPM, Sharp | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | NEC, Sharp, r-step | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | NEC, Sharp | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | NEC, Sharp | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | NEC, Sharp, r-step | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC4 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Sejin 4PPM | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC4 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | r-step | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | r-step | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | r-step, Thomson RCA | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | r-step, Thomson RCA | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | r-step, Thomson RCA | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | r-step, Thomson RCA | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC4 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | RCA, r-step | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC5 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC5 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | MCIR | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC5 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Mitsubishi, RECS-80 Code, r-map | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC5 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC5 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 30 | 0.08 | ± 45 | 0.35 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 24 | 0.12 | ± 45 | 0.7 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC5 | 32 | 0.07 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | r-map | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 30 | AGC6 | 35 | 0.06 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 33 | AGC6 | 35 | 0.06 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | RC-5 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | RC-5 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 36 | AGC6 | 35 | 0.06 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Panasonic, RC-5 | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 38 | AGC6 | 35 | 0.06 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Mitsubishi, NEC, Sharp | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 40 | AGC6 | 35 | 0.06 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded | |||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = VS, 3 = GND | RCA | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC6 | 30 | 0.08 | ± 45 | 0.70 | 1 = OUT, 2 = GND, 3 = VS | RCA | Remote control | Leaded | ||
|
|
Mold | 6.0 W x 6.95 H x 5.6 D | 56 | AGC6 | 35 | 0.06 | ± 45 | 0.37 | 1 = OUT, 2 = GND, 3 = VS | Remote control | Leaded |
